产品详情
1 干燥/固化 这是一种物理干燥很快的油墨。20℃温度条件下10-15分钟可干燥。若要加印，在50℃的隧道式干燥机中干燥60秒即可堆放。通常，油墨用于加印时，干燥时间应延长。上述干燥时间还因承印物、墨膜厚度、干燥条件和所采用的辅助剂而异。
2 耐褪色性 PP系列油墨采用的颜料耐褪色性强。若与印金粘合剂PP902和其它色油墨（尤其是白色油墨）混合，大多数原PP油墨的耐褪色性和耐风蚀性会减弱。若印刷墨膜变薄，也会减弱PP油墨的耐褪色性。PP油墨所采用的颜料具有耐溶剂和耐增塑剂的特性。
3 抗压性 在适当完全干燥之后，墨膜表面呈很好的耐性、柔韧性（这一点对这些承印物来说最重要）。这种油墨还对50%的酒精溶液有抗性。PP油墨在2-3天后可达到最后硬化，但其填充剂耐性很弱。对于此类用途，可参考玛莱宝双组份油墨PU、PY，并对承印物进行适当的预处理。
Drying
Physically fast drying.Dries at 20℃ within 2-3 min.(for overprintability),at 30℃ within 30-40sec.
Fade resistance
Only pigments of high fade resistance are used in the Maraprop PP range.Shades mixed by adding bronze binder or other colour shades,and especilly white,have a reduced fade and weather resistance depending on their mixing ratio.The fade resistance also decreases if the printed ink film thickness is reduced.The pigments used are resistant to solvents and plasticizers.
Stress resistance
After proper and thorough drying,the ink film has an outstanding resistant surface and a high flexibility which is very important for these materials.If this is demanded,please refer to our 2-component systems like Tampapur TPU,Tampapol TPY or Tampaplus TPP with the appropriate pre-treatment.
玛莱宝配色系统中包括14种基本颜色和遮光白料
The satin gloss and fast drying ink Maraprop PP is mainly used when printing onto polypropylene,for example to decorate advertising products or to mark injection moulded parts.Its good adhesion enables prints on many non pre-treated polypropylene materials.Mostly a pre-treatment of the surfact by flaming,by Corona discharge or by applying our Special Primer P2 is not necessary.
深圳市恒彩移印丝印器材有限公司
深圳市恒彩移印丝印器材有限公司是一家专业生产销售移印机、丝印机、烫金机、精密制版、印刷周边设备及耗材、印刷加工、印刷技术咨询与培训的实业公司，集产、销、加工、研究、开发为一体。
在线留言联系我们
邮箱：sales@cnhengcai.com
服务热线： 13828865353
联系地址：广东省深圳市龙岗区横岗街道六约社区龙塘工业区1号2楼
微信公众号
